| Items | Facultas |
| tabula divisio | Aluminium Base, Copper Basis, basis ferrea, ceramics basi cupreus vestitus |
| materia | Domestic Aluminium, cuprum domesticum, aluminium importatum; lmported aeris |
| Superficies curatio | HASL/ENIG/OSP/argentum |
| accumsan rationem | uno latere typis tabula / duplex postesque typis tabula |
| maxi.board Location | 1200mm*480mm |
| min.board Location | 5mm*5mm |
| Recurrat astri latitudine / apsce | 0.1mm/0.1mm |
| stamine ac torquent | <=0.5%(crassitudo:1.6mm,Board Size:300mm*300mm) |
| tabula crassitudine | 0.5mm-5.0mm |
| stultus aeris crassitudine | 35um/70um/105um/140um/175um/210um / 245um/280um/315um/350um |
| V-CUT gradus tolerantiae | CNC routing: ± 0.1mm; ferrum: ± 0.1mm |
| V-CUT registration | ±0.1mm |
| Murus aeris crassitudo | 20um-35um |
| Min adnotatione loci foraminis (Cad data cum campare) | ±3mil(±0.076mm) |
| Min.punching foraminis | 1.0mm infra，1.0mm (Board crassitudine infra1.0mm,1.0mm) |
| Min.punching quadrata socors | 1.0mm infra，1.0mm*1.0mm Tabulae crassitudinis infra 1.0mm,1.0mm*1.0mm) |
| Registration of printed circuit | ±0.076mm |
| Min.drill foramen diametri | 0.6mm |
superficies curatio crassitudine | aurum plating: Ni 4um-6um,Au0.1um-0.5um EIG:Ni 5um-6um,Au:0.0254um-0.127um argentum: Ag3um-8um HASL:40um-100um |
| V CUTdegree tolerantia | ±5(Degree) |
| V CAESA tabula crassitudine | 0.6mm-4.0mm |
| Min.Lefend latitudine | 0.15mm |
| Min.Solder persona ostium | 0.35mm |